Maintenance guide

I have tar on my car. What to do?

Organic contamination and tar residue can be found on any type of vehicle due to their usage. To remove safely this type of contamination you can use Q2M Tar. 

Spray Q2M Tar liberally on a clean and damp vehicle. Use it locally on contaminated area. Let dwell, but do not allow to dry. The solution will react with the contaminant and turn brown. Rinse off heavily, inspect  & re-apply if necessary. 

I have tree sap on my car.
What to do?

For a more effective removal, use Q2M Tar along with  the Q2M SilkMitt. Wipe the contaminated areas in straight motions with low pressure. Organic contamination can be the result of where and how your vehicle is parked - check the environment where your vehicle is staying to reduce the settlement of such contaminants. 

I have contamination i can’t remove.
What to do?

If your vehicle suffers from contamination  that cannot be removed by your wash routine or after chemical decontamination (with Q2M Tar & Q2M Iron) we advise you to contact your GYEON Certified Detailer to inspect your vehicle and propose you an adequate & safe solution of your problem.

My car doesn’t bead. is the coating Gone?

Hydrophobic properties will diminish with time due to potential contamination of the coating itself.

To restore them, chemical decontamination will potentially be the most effective action. We recommend to use Q2M RestartWash, Q2M Iron and Q2M Tar for this procedure.

To boost beading & water repellency you can use multiple maintenance products of the Gyeon range such as Q2M Bathe+, Q2M CeramicDetailer or even Q2M Cure.

I can see swirls & scratches.
Why?

A ceramic coating will reduce the amount of scratches and swirl marks, but not prevent them entirely.  It will not make your car bulletproof but it will make your paintwork more resistant through time and use. 

The defects you can see are most  likely caused by improper washing or drying techniques. Make sure to follow our maintenance guide, use the best techniques and product to avoid possible damage on your coated vehicle.

Why do i have waterspots?

Waterspots are defects caused by water (drops) that dried-up on the surface of your paintwork - the marks are created by the mineral present in the water itself. 

When fresh watermarks appear on your coated vehicle, the coating will absorb the mark first, giving enough time to remove it from the coating itself. 

Remove fresh water marks with
Q2M WaterSpot and wipe with Q2M Cure
to restore hydrophobicity.

If the mineral deposit remains on the paint for a longer period of time, please visit your GYEON Certified Detailer for professional assistance, since machine polishing might be necessary.